India · elevation 670 ft AMSL
· 18.7010, 79.3923
Basanth Nagar Airport (Ramagundam) is an airport with the ICAO code VORG and the IATA code RMD. Country: India. Nearest settlement listed in the database: Ramagundam. OurAirports classifies it as a small airport. Its ICAO code starts with the VO prefix, which marks airports in India. The four-letter code VORG is used in flight operations and weather reports, while the three-letter IATA code RMD is used for ticketing and baggage handling. The airport reference point sits at 18°42'04"N, 79°23'32"E, at an elevation of 670 ft (204 m) above sea level. The applicable time zone is Asia/Kolkata.
Aerial imagery showing the runway and apron layout - the zoom is matched to the longest runway.
| Threshold | Course | Length | Width | Surface |
|---|---|---|---|---|
| 11L | 110° | 1,300 m (4,265 ft) | no data | unpaved |
| 29R | 290° |
The course is derived from the runway designator (number × 10), not from a survey - the actual magnetic bearing can differ by a few degrees.
Declared distances (TORA, TODA, ASDA, LDA) are published in the national AIP - they are not part of this table.
According to the infobox on the English Wikipedia, Basanth Nagar Airport (Ramagundam) has one runway: 11L/29R - 1,300 m long (4,265 ft), unpaved surface.
No OurAirports data is available for this airport, so the figures above come from Wikipedia - a community-edited source that can be out of date. The infobox also gives no runway width. Treat these numbers as indicative and check the current AIP before flying.
The thresholds are oriented as follows: 11L/29R on 110° and 290° magnetic. A threshold designator is its magnetic heading divided by ten (ICAO Annex 14), so the runway axis can be read straight off the numbers.
For the 11L/29R axis, wind from the south (around 200°) or from the north (around 20°) blows perpendicular to the runway and produces the largest crosswind component. Wind from around 110° or 290° acts along the runway, as a headwind or a tailwind. The decoder on this page computes those components automatically from the current METAR.
Weather reports for Basanth Nagar Airport (Ramagundam) are published under the ICAO code VORG. A METAR is an observation of current conditions, usually issued every 30 or 60 minutes; a TAF is a forecast for the airport area, typically covering 9 to 30 hours.
The decoder breaks the VORG report down into its parts: wind direction and speed including gusts and variability, visibility (including CAVOK and directional minimum visibility), weather phenomena by WMO code, cloud layers with their bases, temperature and dew point, QNH pressure, and the resulting flight category - VFR, MVFR, IFR or LIFR - using FAA thresholds.
Not every airport issues its own reports; many smaller airfields have no weather station. If no current data is available for VORG, check the nearby airports listed below.
Reports always use UTC (the Z suffix). The Asia/Kolkata zone stays at GMT+05:30 year-round, so converting to local time is always the same shift.
The closest airports in the database, measured in a straight line from the reference point, are Warangal Airport (VOWA, 90 km), Hakimpet Airport (Secunderabad) (VOHK, 157 km), Dundigul Air Force Academy (Hyderabad) (VODG, 159 km). When no report is available for VORG, they usually give the best approximation of conditions in the area.
METAR Academy
Step-by-step guides - with examples, charts and calculators.
Advertisement
Pass your ICAO Aviation English exam - 100% online
ICAO Level 4, 5 or 6 for PPL(A)/CPL(A)/ATPL(A): aviation vocabulary, radio phraseology, pronunciation and standard/emergency flight scenarios. Buy through this link and get a 10% discount.
Advertisement
VFR Map Europe - your aeronautical chart in the cockpit
Moving GPS map, airspace and zones, airspace alerts and offline use. Plan your VFR route online for free and send it to the app. The online map is free.
Check VFR MapRun a flying club, a training organisation or an airfield website? Embed a ready-made panel with the current VORG METAR - flight category, wind, visibility, temperature and pressure, refreshed automatically. The configurator lets you pick language, theme and units; you paste the code once.
