Runways at VEBI
According to OurAirports data (compiled from AIP and FAA sources), Shillong Airport has one runway: 04/22 - 1,829 m long (6,000 ft), 46 m wide, asphalt surface.
India · elevation 2910 ft AMSL
· 25.7036, 91.9787
Shillong Airport is an airport with the ICAO code VEBI and the IATA code SHL. Country: India. Nearest settlement listed in the database: Shillong. OurAirports classifies it as a medium-sized airport. Its ICAO code starts with the VE prefix, which marks airports in India. The four-letter code VEBI is used in flight operations and weather reports, while the three-letter IATA code SHL is used for ticketing and baggage handling. The airport reference point sits at 25°42'13"N, 91°58'43"E, at an elevation of 2,910 ft (887 m) above sea level. The applicable time zone is Asia/Kolkata.
Aerial imagery showing the runway and apron layout - the zoom is matched to the longest runway.
| Threshold | Course | Length | Width | Surface |
|---|---|---|---|---|
| 04 | 40° | 1,829 m (6,000 ft) | 46 m (150 ft) | asphalt |
| 22 | 220° |
The course is derived from the runway designator (number × 10), not from a survey - the actual magnetic bearing can differ by a few degrees.
Declared distances (TORA, TODA, ASDA, LDA) are published in the national AIP - they are not part of this table.
According to OurAirports data (compiled from AIP and FAA sources), Shillong Airport has one runway: 04/22 - 1,829 m long (6,000 ft), 46 m wide, asphalt surface.
The thresholds are oriented as follows: 04/22 on 40° and 220° magnetic. A threshold designator is its magnetic heading divided by ten (ICAO Annex 14), so the runway axis can be read straight off the numbers.
For the 04/22 axis, wind from the south-east (around 130°) or from the north-west (around 310°) blows perpendicular to the runway and produces the largest crosswind component. Wind from around 40° or 220° acts along the runway, as a headwind or a tailwind. The decoder on this page computes those components automatically from the current METAR.
Weather reports for Shillong Airport are published under the ICAO code VEBI. A METAR is an observation of current conditions, usually issued every 30 or 60 minutes; a TAF is a forecast for the airport area, typically covering 9 to 30 hours.
The decoder breaks the VEBI report down into its parts: wind direction and speed including gusts and variability, visibility (including CAVOK and directional minimum visibility), weather phenomena by WMO code, cloud layers with their bases, temperature and dew point, QNH pressure, and the resulting flight category - VFR, MVFR, IFR or LIFR - using FAA thresholds.
Not every airport issues its own reports; many smaller airfields have no weather station. If no current data is available for VEBI, check the nearby airports listed below.
Reports always use UTC (the Z suffix). The Asia/Kolkata zone stays at GMT+05:30 year-round, so converting to local time is always the same shift.
The closest airports in the database, measured in a straight line from the reference point, are Lokpriya Gopinath Bordoloi International Airport (Guwahati) (VEGT, 60 km), Osmany International Airport (Sylhet) (VGSY, 83 km), Silchar Airport (VEKU, 134 km). When no report is available for VEBI, they usually give the best approximation of conditions in the area.
METAR Academy
Step-by-step guides - with examples, charts and calculators.
Advertisement
Pass your ICAO Aviation English exam - 100% online
ICAO Level 4, 5 or 6 for PPL(A)/CPL(A)/ATPL(A): aviation vocabulary, radio phraseology, pronunciation and standard/emergency flight scenarios. Buy through this link and get a 10% discount.
Advertisement

VFR Map Europe - your aeronautical chart in the cockpit
Moving GPS map, airspace and zones, airspace alerts and offline use. Plan your VFR route online for free and send it to the app. The online map is free.
Check VFR MapThe METAR archive for VEBI goes back to 15/02/2016. Pick a date and see every observation from that day.
Run a flying club, a training organisation or an airfield website? Embed a ready-made panel with the current VEBI METAR - flight category, wind, visibility, temperature and pressure, refreshed automatically. The configurator lets you pick language, theme and units; you paste the code once.