Iran · elevation 5609 ft AMSL
· 35.2116, 48.6534
Nojeh Air Base (Amirabad) is an airport with the ICAO code OIHS and the IATA code NUJ. Country: Iran. Nearest settlement listed in the database: Amirabad. OurAirports classifies it as a medium-sized airport. Its ICAO code starts with the OI prefix, which marks airports in Iran. The four-letter code OIHS is used in flight operations and weather reports, while the three-letter IATA code NUJ is used for ticketing and baggage handling. The airport reference point sits at 35°12'42"N, 48°39'12"E, at an elevation of 5,609 ft (1,710 m) above sea level. The applicable time zone is Asia/Tehran.
Aerial imagery showing the runway and apron layout - the zoom is matched to the longest runway.
| Threshold | Course | Length | Width | Surface |
|---|---|---|---|---|
| 05 | 50° | 3,936 m (12,915 ft) | 45 m (148 ft) | asphalt |
| 23 | 230° | |||
| 13R | 130° | 4,359 m (14,300 ft) | 45 m (148 ft) | asphalt |
| 31L | 310° |
The course is derived from the runway designator (number × 10), not from a survey - the actual magnetic bearing can differ by a few degrees.
Declared distances (TORA, TODA, ASDA, LDA) are published in the national AIP - they are not part of this table.
According to OurAirports data (compiled from AIP and FAA sources), Nojeh Air Base (Amirabad) has 2 runways: 05/23 - 3,936 m long (12,915 ft), 45 m wide, asphalt surface; 13R/31L - 4,359 m long (14,300 ft), 45 m wide, asphalt surface.
The longest of them is 13R/31L, at 4,359 m.
The thresholds are oriented as follows: 05/23 on 50° and 230° magnetic, 13R/31L on 130° and 310° magnetic. A threshold designator is its magnetic heading divided by ten (ICAO Annex 14), so the runway axis can be read straight off the numbers.
For the 05/23 axis, wind from the south-east (around 140°) or from the north-west (around 320°) blows perpendicular to the runway and produces the largest crosswind component. Wind from around 50° or 230° acts along the runway, as a headwind or a tailwind. The decoder on this page computes those components automatically from the current METAR.
Weather reports for Nojeh Air Base (Amirabad) are published under the ICAO code OIHS. A METAR is an observation of current conditions, usually issued every 30 or 60 minutes; a TAF is a forecast for the airport area, typically covering 9 to 30 hours.
The decoder breaks the OIHS report down into its parts: wind direction and speed including gusts and variability, visibility (including CAVOK and directional minimum visibility), weather phenomena by WMO code, cloud layers with their bases, temperature and dew point, QNH pressure, and the resulting flight category - VFR, MVFR, IFR or LIFR - using FAA thresholds.
Not every airport issues its own reports; many smaller airfields have no weather station. If no current data is available for OIHS, check the nearby airports listed below.
Reports always use UTC (the Z suffix). The Asia/Tehran zone stays at GMT+03:30 year-round, so converting to local time is always the same shift.
The closest airports in the database, measured in a straight line from the reference point, are Hamadan Airport (OIHH, 39 km), Malayer Airport (OIHM, 104 km), Sanandaj Airport (OICS, 149 km). When no report is available for OIHS, they usually give the best approximation of conditions in the area.
METAR Academy
Step-by-step guides - with examples, charts and calculators.
Advertisement
Pass your ICAO Aviation English exam - 100% online
ICAO Level 4, 5 or 6 for PPL(A)/CPL(A)/ATPL(A): aviation vocabulary, radio phraseology, pronunciation and standard/emergency flight scenarios. Buy through this link and get a 10% discount.
Advertisement
VFR Map Europe - your aeronautical chart in the cockpit
Moving GPS map, airspace and zones, airspace alerts and offline use. Plan your VFR route online for free and send it to the app. The online map is free.
Check VFR MapRun a flying club, a training organisation or an airfield website? Embed a ready-made panel with the current OIHS METAR - flight category, wind, visibility, temperature and pressure, refreshed automatically. The configurator lets you pick language, theme and units; you paste the code once.
