Italy · elevation 49 ft AMSL
· 43.2268, 13.7433
Fermano Airfield (Fermo (FM)) is an airport with the ICAO code LINF. Country: Italy. Nearest settlement listed in the database: Fermo (FM). OurAirports classifies it as a small airport. Its ICAO code starts with the LI prefix, which marks airports in Italy. No IATA code is assigned, which is typical for airports without scheduled traffic. The airport reference point sits at 43°13'36"N, 13°44'36"E, at an elevation of 49 ft (15 m) above sea level. The applicable time zone is Europe/Rome.
Aerial imagery showing the runway and apron layout - the zoom is matched to the longest runway.
| Threshold | Course | Length | Width | Surface |
|---|---|---|---|---|
| 06 | 60° | 550 m (1,804 ft) | 25 m (82 ft) | grass |
| 24 | 240° |
The course is derived from the runway designator (number × 10), not from a survey - the actual magnetic bearing can differ by a few degrees.
Declared distances (TORA, TODA, ASDA, LDA) are published in the national AIP - they are not part of this table.
According to OurAirports data (compiled from AIP and FAA sources), Fermano Airfield (Fermo (FM)) has one runway: 06/24 - 550 m long (1,804 ft), 25 m wide, grass surface.
All runways have a grass surface, which distinguishes this site from airports with a paved runway.
The thresholds are oriented as follows: 06/24 on 60° and 240° magnetic. A threshold designator is its magnetic heading divided by ten (ICAO Annex 14), so the runway axis can be read straight off the numbers.
For the 06/24 axis, wind from the south-east (around 150°) or from the north-west (around 330°) blows perpendicular to the runway and produces the largest crosswind component. Wind from around 60° or 240° acts along the runway, as a headwind or a tailwind. The decoder on this page computes those components automatically from the current METAR.
Weather reports for Fermano Airfield (Fermo (FM)) are published under the ICAO code LINF. A METAR is an observation of current conditions, usually issued every 30 or 60 minutes; a TAF is a forecast for the airport area, typically covering 9 to 30 hours.
The decoder breaks the LINF report down into its parts: wind direction and speed including gusts and variability, visibility (including CAVOK and directional minimum visibility), weather phenomena by WMO code, cloud layers with their bases, temperature and dew point, QNH pressure, and the resulting flight category - VFR, MVFR, IFR or LIFR - using FAA thresholds.
Not every airport issues its own reports; many smaller airfields have no weather station. If no current data is available for LINF, check the nearby airports listed below.
Reports always use UTC (the Z suffix). The Europe/Rome zone is GMT+01:00 in winter and GMT+02:00 in summer - that is the shift to apply to the time in the report to get local time at the airport.
The closest airports in the database, measured in a straight line from the reference point, are Marche Airport (Falconara Marittima (AN)) (LIPY, 53 km), Fano Airfield (Fano (PU)) (LIDF, 88 km), Foligno Airfield (Foligno (PG)) (LIAF, 90 km). When no report is available for LINF, they usually give the best approximation of conditions in the area.
METAR Academy
Step-by-step guides - with examples, charts and calculators.
Advertisement
Pass your ICAO Aviation English exam - 100% online
ICAO Level 4, 5 or 6 for PPL(A)/CPL(A)/ATPL(A): aviation vocabulary, radio phraseology, pronunciation and standard/emergency flight scenarios. Buy through this link and get a 10% discount.
Advertisement
VFR Map Europe - your aeronautical chart in the cockpit
Moving GPS map, airspace and zones, airspace alerts and offline use. Plan your VFR route online for free and send it to the app. The online map is free.
Check VFR MapRun a flying club, a training organisation or an airfield website? Embed a ready-made panel with the current LINF METAR - flight category, wind, visibility, temperature and pressure, refreshed automatically. The configurator lets you pick language, theme and units; you paste the code once.
