Ulongwe Airport (FQUG)

Runways at FQUG

According to OurAirports data (compiled from AIP and FAA sources), Ulongwe Airport has one runway: 16/34 - 1,798 m long (5,900 ft), 30 m wide, asphalt surface.

Runway headings and wind

The thresholds are oriented as follows: 16/34 on 160° and 340° magnetic. A threshold designator is its magnetic heading divided by ten (ICAO Annex 14), so the runway axis can be read straight off the numbers.

For the 16/34 axis, wind from the west (around 250°) or from the east (around 70°) blows perpendicular to the runway and produces the largest crosswind component. Wind from around 160° or 340° acts along the runway, as a headwind or a tailwind. The decoder on this page computes those components automatically from the current METAR.

METAR and TAF for FQUG

Weather reports for Ulongwe Airport are published under the ICAO code FQUG. A METAR is an observation of current conditions, usually issued every 30 or 60 minutes; a TAF is a forecast for the airport area, typically covering 9 to 30 hours.

The decoder breaks the FQUG report down into its parts: wind direction and speed including gusts and variability, visibility (including CAVOK and directional minimum visibility), weather phenomena by WMO code, cloud layers with their bases, temperature and dew point, QNH pressure, and the resulting flight category - VFR, MVFR, IFR or LIFR - using FAA thresholds.

Not every airport issues its own reports; many smaller airfields have no weather station. If no current data is available for FQUG, check the nearby airports listed below.

Reports always use UTC (the Z suffix). The Africa/Maputo zone stays at GMT+02:00 year-round, so converting to local time is always the same shift.

The closest airports in the database, measured in a straight line from the reference point, are Mtakatata Airport (FWTK, 58 km), Furancungo Airport (FQFU, 81 km), Monkey Bay Airport (FWMY, 92 km). When no report is available for FQUG, they usually give the best approximation of conditions in the area.