Amedee Army Air Field (Herlong) (KAHC / AHC)

United States · elevation 4012 ft AMSL · 40.2662, -120.1530 · Local time: --:--:-- · UTC time: --:--:--

About Amedee Army Air Field (Herlong)

Amedee Army Air Field (Herlong) is an airport with the ICAO code KAHC and the IATA code AHC. Country: United States. Nearest settlement listed in the database: Herlong. OurAirports classifies it as a small airport. Its ICAO code starts with the KA prefix, which marks airports in United States. The four-letter code KAHC is used in flight operations and weather reports, while the three-letter IATA code AHC is used for ticketing and baggage handling. The airport reference point sits at 40°15'58"N, 120°09'11"W, at an elevation of 4,012 ft (1,223 m) above sea level. The applicable time zone is America/Los_Angeles.

Satellite view of KAHC

Aerial imagery showing the runway and apron layout - the zoom is matched to the longest runway.

Open the satellite view in Google Maps

Runways of KAHC

ThresholdCourseLengthWidthSurface
0990°3,048 m (10,000 ft)46 m (150 ft)asphalt
27270°

The course is derived from the runway designator (number × 10), not from a survey - the actual magnetic bearing can differ by a few degrees.

Declared distances (TORA, TODA, ASDA, LDA) are published in the national AIP - they are not part of this table.

Runways at KAHC

According to OurAirports data (compiled from AIP and FAA sources), Amedee Army Air Field (Herlong) has one runway: 09/27 - 3,048 m long (10,000 ft), 46 m wide, asphalt surface.

Runway headings and wind

The thresholds are oriented as follows: 09/27 on 90° and 270° magnetic. A threshold designator is its magnetic heading divided by ten (ICAO Annex 14), so the runway axis can be read straight off the numbers.

For the 09/27 axis, wind from the south (around 180°) or from the north (around 360°) blows perpendicular to the runway and produces the largest crosswind component. Wind from around 90° or 270° acts along the runway, as a headwind or a tailwind. The decoder on this page computes those components automatically from the current METAR.

METAR and TAF for KAHC

Weather reports for Amedee Army Air Field (Herlong) are published under the ICAO code KAHC. A METAR is an observation of current conditions, usually issued every 30 or 60 minutes; a TAF is a forecast for the airport area, typically covering 9 to 30 hours.

The decoder breaks the KAHC report down into its parts: wind direction and speed including gusts and variability, visibility (including CAVOK and directional minimum visibility), weather phenomena by WMO code, cloud layers with their bases, temperature and dew point, QNH pressure, and the resulting flight category - VFR, MVFR, IFR or LIFR - using FAA thresholds.

Not every airport issues its own reports; many smaller airfields have no weather station. If no current data is available for KAHC, check the nearby airports listed below.

Reports always use UTC (the Z suffix). The America/Los_Angeles zone is GMT-08:00 in winter and GMT-07:00 in summer - that is the shift to apply to the time in the report to get local time at the airport.

The closest airports in the database, measured in a straight line from the reference point, are Susanville Municipal Airport (KSVE, 38 km), Reno-Stead Airport (KRTS, 71 km), Reno Tahoe International Airport (KRNO, 91 km). When no report is available for KAHC, they usually give the best approximation of conditions in the area.

METAR Academy

Something unclear in the KAHC report?

Step-by-step guides - with examples, charts and calculators.

Advertisement

ICAO4U

Pass your ICAO Aviation English exam - 100% online

ICAO Level 4, 5 or 6 for PPL(A)/CPL(A)/ATPL(A): aviation vocabulary, radio phraseology, pronunciation and standard/emergency flight scenarios. Buy through this link and get a 10% discount.

Check ICAO4U

Nearby airports

Live weather from KAHC on your website

Run a flying club, a training organisation or an airfield website? Embed a ready-made panel with the current KAHC METAR - flight category, wind, visibility, temperature and pressure, refreshed automatically. The configurator lets you pick language, theme and units; you paste the code once.

Configure the widget Free, no account and no display limit.