Runways at KHTF
According to OurAirports data (compiled from AIP and FAA sources), Hornell Municipal Airport has one runway: 18/36 - 1,524 m long (5,000 ft), 23 m wide, asphalt surface.
United States · elevation 1219 ft AMSL
· 42.3821, -77.6821
Hornell Municipal Airport is an airport with the ICAO code KHTF. Country: United States. Nearest settlement listed in the database: Hornell. OurAirports classifies it as a small airport. Its ICAO code starts with the KH prefix, which marks airports in United States. No IATA code is assigned, which is typical for airports without scheduled traffic. The airport reference point sits at 42°22'56"N, 77°40'56"W, at an elevation of 1,219 ft (372 m) above sea level. The applicable time zone is America/New_York.
Aerial imagery showing the runway and apron layout - the zoom is matched to the longest runway.
| Threshold | Course | Length | Width | Surface |
|---|---|---|---|---|
| 18 | 180° | 1,524 m (5,000 ft) | 23 m (75 ft) | asphalt |
| 36 | 360° |
The course is derived from the runway designator (number × 10), not from a survey - the actual magnetic bearing can differ by a few degrees.
Declared distances (TORA, TODA, ASDA, LDA) are published in the national AIP - they are not part of this table.
According to OurAirports data (compiled from AIP and FAA sources), Hornell Municipal Airport has one runway: 18/36 - 1,524 m long (5,000 ft), 23 m wide, asphalt surface.
The thresholds are oriented as follows: 18/36 on 180° and 360° magnetic. A threshold designator is its magnetic heading divided by ten (ICAO Annex 14), so the runway axis can be read straight off the numbers.
For the 18/36 axis, wind from the west (around 270°) or from the east (around 90°) blows perpendicular to the runway and produces the largest crosswind component. Wind from around 180° or 360° acts along the runway, as a headwind or a tailwind. The decoder on this page computes those components automatically from the current METAR.
Weather reports for Hornell Municipal Airport are published under the ICAO code KHTF. A METAR is an observation of current conditions, usually issued every 30 or 60 minutes; a TAF is a forecast for the airport area, typically covering 9 to 30 hours.
The decoder breaks the KHTF report down into its parts: wind direction and speed including gusts and variability, visibility (including CAVOK and directional minimum visibility), weather phenomena by WMO code, cloud layers with their bases, temperature and dew point, QNH pressure, and the resulting flight category - VFR, MVFR, IFR or LIFR - using FAA thresholds.
Not every airport issues its own reports; many smaller airfields have no weather station. If no current data is available for KHTF, check the nearby airports listed below.
Reports always use UTC (the Z suffix). The America/New_York zone is GMT-05:00 in winter and GMT-04:00 in summer - that is the shift to apply to the time in the report to get local time at the airport.
The closest airports in the database, measured in a straight line from the reference point, are Dansville Municipal Airport (KDSV, 21 km), Wellsville Municipal Airport - Tarantine Field (KELZ, 40 km), Cattaraugus County-Olean Airport (KOLE, 59 km). When no report is available for KHTF, they usually give the best approximation of conditions in the area.
METAR Academy
Step-by-step guides - with examples, charts and calculators.
Advertisement
Pass your ICAO Aviation English exam - 100% online
ICAO Level 4, 5 or 6 for PPL(A)/CPL(A)/ATPL(A): aviation vocabulary, radio phraseology, pronunciation and standard/emergency flight scenarios. Buy through this link and get a 10% discount.
Run a flying club, a training organisation or an airfield website? Embed a ready-made panel with the current KHTF METAR - flight category, wind, visibility, temperature and pressure, refreshed automatically. The configurator lets you pick language, theme and units; you paste the code once.