United States · elevation 90 ft AMSL
· 29.1726, -82.2242
Ocala International Airport - Jim Taylor Field is an airport with the ICAO code KOCF and the IATA code OCF. Country: United States. Nearest settlement listed in the database: Ocala. OurAirports classifies it as a small airport. Its ICAO code starts with the KO prefix, which marks airports in United States. The four-letter code KOCF is used in flight operations and weather reports, while the three-letter IATA code OCF is used for ticketing and baggage handling. The airport reference point sits at 29°10'21"N, 82°13'27"W, at an elevation of 90 ft (27 m) above sea level. The applicable time zone is America/New_York.
Aerial imagery showing the runway and apron layout - the zoom is matched to the longest runway.
| Threshold | Course | Length | Width | Surface |
|---|---|---|---|---|
| 08 | 80° | 917 m (3,009 ft) | 15 m (50 ft) | asphalt |
| 26 | 260° | |||
| 18 | 180° | 2,276 m (7,467 ft) | 46 m (150 ft) | asphalt |
| 36 | 360° |
The course is derived from the runway designator (number × 10), not from a survey - the actual magnetic bearing can differ by a few degrees.
Declared distances (TORA, TODA, ASDA, LDA) are published in the national AIP - they are not part of this table.
What the METAR reports from KOCF for 2023-2025 show - counted hour by hour.
We computed these statistics from 25,695 METAR reports issued by KOCF in 2023-2025. VFR conditions prevailed 85% of the time, MVFR 8% and IFR or LIFR 7%. Best month for VFR flying: August (93% of hours VFR). Most IFR and LIFR hours: February (16%).
Through the day, IFR or LIFR conditions are most frequent around 11:00 UTC (17% of reports at that hour) and least frequent around 18:00 UTC (1%).
Fog (FG) was reported on 38 days a year on average, most often in February. Thunderstorms (TS) occurred on 46 days a year on average, and snowfall practically never.
The wind most often blows from N (0°) - 8% of reports. Calm (0 kt) made up 24% of reports, and gusts of 25 kt or more appeared in 1%. Warmest month: July (average high 33.2 °C); coldest: January (average low 7.5 °C).
Day counts are for the selected period (for all years - the yearly average).
The top of each bar is the average daily high, the bottom the average daily low (usually around dawn), in °C.
Most often: N - 8% of reports. Each petal shows the direction the wind blows from (as in METAR) - the longer it is, the more often. Colour shows wind speed.
| Month | Avg high °C | Avg low °C | VFR | IFR/LIFR | Fog days | Thunderstorm days | Snow days |
|---|---|---|---|---|---|---|---|
| January | 20.7 | 7.5 | 82% | 9% | 5 | 0.3 | 0.3 |
| February | 24.5 | 10.8 | 76% | 16% | 7.6 | 0 | 0 |
| March | 26.1 | 13.0 | 82% | 9% | 5.7 | 1.3 | 0 |
| April | 28.8 | 15.6 | 91% | 3% | 1.3 | 3 | 0 |
| May | 31.1 | 19.5 | 92% | 3% | 2 | 5.4 | 0 |
| June | 32.6 | 22.5 | 92% | 1% | 0 | 9.4 | 0 |
| July | 33.2 | 23.8 | 92% | 2% | 1 | 15 | 0 |
| August | 33.2 | 23.9 | 93% | 2% | 0.4 | 7.5 | 0 |
| September | 31.2 | 22.0 | 83% | 7% | 1.4 | 4.3 | 0 |
| October | 27.8 | 17.4 | 81% | 8% | 4 | 0 | 0 |
| November | 25.2 | 12.6 | 85% | 9% | 3.3 | 0 | 0 |
| December | 21.8 | 10.4 | 75% | 15% | 6.7 | 0 | 0 |
Temperatures are averages of daily highs and lows. Day counts are the average per month over the period.
According to OurAirports data (compiled from AIP and FAA sources), Ocala International Airport - Jim Taylor Field has 2 runways: 08/26 - 917 m long (3,009 ft), 15 m wide, asphalt surface; 18/36 - 2,276 m long (7,467 ft), 46 m wide, asphalt surface.
The longest of them is 18/36, at 2,276 m.
The thresholds are oriented as follows: 08/26 on 80° and 260° magnetic, 18/36 on 180° and 360° magnetic. A threshold designator is its magnetic heading divided by ten (ICAO Annex 14), so the runway axis can be read straight off the numbers.
For the 08/26 axis, wind from the south (around 170°) or from the north (around 350°) blows perpendicular to the runway and produces the largest crosswind component. Wind from around 80° or 260° acts along the runway, as a headwind or a tailwind. The decoder on this page computes those components automatically from the current METAR.
Weather reports for Ocala International Airport - Jim Taylor Field are published under the ICAO code KOCF. A METAR is an observation of current conditions, usually issued every 30 or 60 minutes; a TAF is a forecast for the airport area, typically covering 9 to 30 hours.
The decoder breaks the KOCF report down into its parts: wind direction and speed including gusts and variability, visibility (including CAVOK and directional minimum visibility), weather phenomena by WMO code, cloud layers with their bases, temperature and dew point, QNH pressure, and the resulting flight category - VFR, MVFR, IFR or LIFR - using FAA thresholds.
Not every airport issues its own reports; many smaller airfields have no weather station. If no current data is available for KOCF, check the nearby airports listed below.
Reports always use UTC (the Z suffix). The America/New_York zone is GMT-05:00 in winter and GMT-04:00 in summer - that is the shift to apply to the time in the report to get local time at the airport.
The closest airports in the database, measured in a straight line from the reference point, are Inverness Airport (KINF, 42 km), Crystal River Airport (KCGC, 48 km), Leesburg International Airport (KLEE, 56 km). When no report is available for KOCF, they usually give the best approximation of conditions in the area.
METAR Academy
Step-by-step guides - with examples, charts and calculators.
Advertisement
Pass your ICAO Aviation English exam - 100% online
ICAO Level 4, 5 or 6 for PPL(A)/CPL(A)/ATPL(A): aviation vocabulary, radio phraseology, pronunciation and standard/emergency flight scenarios. Buy through this link and get a 10% discount.
The METAR archive for KOCF goes back to 07/01/1944. Pick a date and see every observation from that day.
Run a flying club, a training organisation or an airfield website? Embed a ready-made panel with the current KOCF METAR - flight category, wind, visibility, temperature and pressure, refreshed automatically. The configurator lets you pick language, theme and units; you paste the code once.
