Stevens Village Airport (PFSV / SVS)

United States · elevation 328 ft AMSL · 66.0167, -149.0568 · Local time: --:--:-- · UTC time: --:--:--

About Stevens Village Airport

Stevens Village Airport is an airport with the ICAO code PFSV and the IATA code SVS. Country: United States. Nearest settlement listed in the database: Stevens Village. OurAirports classifies it as a small airport. Its ICAO code starts with the PF prefix, which marks airports in United States. The four-letter code PFSV is used in flight operations and weather reports, while the three-letter IATA code SVS is used for ticketing and baggage handling. The airport reference point sits at 66°01'00"N, 149°03'25"W, at an elevation of 328 ft (100 m) above sea level. The applicable time zone is America/Anchorage.

Satellite view of PFSV

Aerial imagery showing the runway and apron layout - the zoom is matched to the longest runway.

Open the satellite view in Google Maps

Runways of PFSV

ThresholdCourseLengthWidthSurface
0550°1,219 m (4,000 ft)23 m (75 ft)unpaved
23230°

The course is derived from the runway designator (number × 10), not from a survey - the actual magnetic bearing can differ by a few degrees.

Declared distances (TORA, TODA, ASDA, LDA) are published in the national AIP - they are not part of this table.

Runways at PFSV

According to OurAirports data (compiled from AIP and FAA sources), Stevens Village Airport has one runway: 05/23 - 1,219 m long (4,000 ft), 23 m wide, unpaved surface.

Runway headings and wind

The thresholds are oriented as follows: 05/23 on 50° and 230° magnetic. A threshold designator is its magnetic heading divided by ten (ICAO Annex 14), so the runway axis can be read straight off the numbers.

For the 05/23 axis, wind from the south-east (around 140°) or from the north-west (around 320°) blows perpendicular to the runway and produces the largest crosswind component. Wind from around 50° or 230° acts along the runway, as a headwind or a tailwind. The decoder on this page computes those components automatically from the current METAR.

METAR and TAF for PFSV

Weather reports for Stevens Village Airport are published under the ICAO code PFSV. A METAR is an observation of current conditions, usually issued every 30 or 60 minutes; a TAF is a forecast for the airport area, typically covering 9 to 30 hours.

The decoder breaks the PFSV report down into its parts: wind direction and speed including gusts and variability, visibility (including CAVOK and directional minimum visibility), weather phenomena by WMO code, cloud layers with their bases, temperature and dew point, QNH pressure, and the resulting flight category - VFR, MVFR, IFR or LIFR - using FAA thresholds.

Not every airport issues its own reports; many smaller airfields have no weather station. If no current data is available for PFSV, check the nearby airports listed below.

Reports always use UTC (the Z suffix). The America/Anchorage zone is GMT-09:00 in winter and GMT-08:00 in summer - that is the shift to apply to the time in the report to get local time at the airport.

The closest airports in the database, measured in a straight line from the reference point, are Rampart Airport (PFMP, 75 km), Beaver Airport (PAWB, 83 km), Prospect Creek Airport (PAPR, 113 km). When no report is available for PFSV, they usually give the best approximation of conditions in the area.

METAR Academy

Something unclear in the PFSV report?

Step-by-step guides - with examples, charts and calculators.

Advertisement

ICAO4U

Pass your ICAO Aviation English exam - 100% online

ICAO Level 4, 5 or 6 for PPL(A)/CPL(A)/ATPL(A): aviation vocabulary, radio phraseology, pronunciation and standard/emergency flight scenarios. Buy through this link and get a 10% discount.

Check ICAO4U

Nearby airports

Live weather from PFSV on your website

Run a flying club, a training organisation or an airfield website? Embed a ready-made panel with the current PFSV METAR - flight category, wind, visibility, temperature and pressure, refreshed automatically. The configurator lets you pick language, theme and units; you paste the code once.

Configure the widget Free, no account and no display limit.