Runways at VEBD
According to OurAirports data (compiled from AIP and FAA sources), Bagdogra Airport (Siliguri) has one runway: 18/36 - 2,754 m long (9,035 ft), 46 m wide, asphalt surface.
India · elevation 412 ft AMSL
· 26.6812, 88.3286
Bagdogra Airport (Siliguri) is an airport with the ICAO code VEBD and the IATA code IXB. Country: India. Nearest settlement listed in the database: Siliguri. OurAirports classifies it as a large airport. Its ICAO code starts with the VE prefix, which marks airports in India. The four-letter code VEBD is used in flight operations and weather reports, while the three-letter IATA code IXB is used for ticketing and baggage handling. The airport reference point sits at 26°40'52"N, 88°19'43"E, at an elevation of 412 ft (126 m) above sea level. The applicable time zone is Asia/Kolkata.
Aerial imagery showing the runway and apron layout - the zoom is matched to the longest runway.
| Threshold | Course | Length | Width | Surface |
|---|---|---|---|---|
| 18 | 180° | 2,754 m (9,035 ft) | 46 m (150 ft) | asphalt |
| 36 | 360° |
The course is derived from the runway designator (number × 10), not from a survey - the actual magnetic bearing can differ by a few degrees.
Declared distances (TORA, TODA, ASDA, LDA) are published in the national AIP - they are not part of this table.
According to OurAirports data (compiled from AIP and FAA sources), Bagdogra Airport (Siliguri) has one runway: 18/36 - 2,754 m long (9,035 ft), 46 m wide, asphalt surface.
The thresholds are oriented as follows: 18/36 on 180° and 360° magnetic. A threshold designator is its magnetic heading divided by ten (ICAO Annex 14), so the runway axis can be read straight off the numbers.
For the 18/36 axis, wind from the west (around 270°) or from the east (around 90°) blows perpendicular to the runway and produces the largest crosswind component. Wind from around 180° or 360° acts along the runway, as a headwind or a tailwind. The decoder on this page computes those components automatically from the current METAR.
Weather reports for Bagdogra Airport (Siliguri) are published under the ICAO code VEBD. A METAR is an observation of current conditions, usually issued every 30 or 60 minutes; a TAF is a forecast for the airport area, typically covering 9 to 30 hours.
The decoder breaks the VEBD report down into its parts: wind direction and speed including gusts and variability, visibility (including CAVOK and directional minimum visibility), weather phenomena by WMO code, cloud layers with their bases, temperature and dew point, QNH pressure, and the resulting flight category - VFR, MVFR, IFR or LIFR - using FAA thresholds.
Not every airport issues its own reports; many smaller airfields have no weather station. If no current data is available for VEBD, check the nearby airports listed below.
Reports always use UTC (the Z suffix). The Asia/Kolkata zone stays at GMT+05:30 year-round, so converting to local time is always the same shift.
The closest airports in the database, measured in a straight line from the reference point, are Bhadrapur Airport (VNCG, 28 km), Pakyong Airport (VEPY, 66 km), Thakurgaon Airport (VGSG, 74 km). When no report is available for VEBD, they usually give the best approximation of conditions in the area.
METAR Academy
Step-by-step guides - with examples, charts and calculators.
Advertisement
Pass your ICAO Aviation English exam - 100% online
ICAO Level 4, 5 or 6 for PPL(A)/CPL(A)/ATPL(A): aviation vocabulary, radio phraseology, pronunciation and standard/emergency flight scenarios. Buy through this link and get a 10% discount.
Advertisement

VFR Map Europe - your aeronautical chart in the cockpit
Moving GPS map, airspace and zones, airspace alerts and offline use. Plan your VFR route online for free and send it to the app. The online map is free.
Check VFR MapThe METAR archive for VEBD goes back to 18/06/1957. Pick a date and see every observation from that day.
Run a flying club, a training organisation or an airfield website? Embed a ready-made panel with the current VEBD METAR - flight category, wind, visibility, temperature and pressure, refreshed automatically. The configurator lets you pick language, theme and units; you paste the code once.